Epoxy Bond HM LV

Epoxy Bond HM LV

Description

Epoxy Bond is a two component, 100% solids, structural adhesive used for sealing cracks under damp and dry conditions. It is a high modulus, moisture insensitive bonding agent that can be used for patching and grouting either wet or dry surfaces. Epoxy-Bond is an excellent anchoring epoxy system for bolts, steel rods, and rebars into concrete or other substrates.

MEETS ASTM C-881, TYPE I II, III, GRADE 1, CLASS B & C

Basic Uses

Positive bonding of new concrete to old, eroded or spalled concrete surfaces. Waterproofing and restoration of all concrete surfaces.
Sprayable Formulation!

Limitations

Epoxy-Bond HM LV should not be applied at temperatures below 40 degrees F. Don with thin with solvents. Do not apply over latex concrete, mastics and greasy or oily concrete. Epoxy-Bond HM LV can be used as an adhesive for fresh plastic Portland cement mortar or concrete.

Surface Preparation

Surfaces of application should be clean and sound. Use conventional cleaning methods such as acid etching or mechanical scarification. Surface may be dry or damp, but free of standing water.
Coverage: 200 square feet per gallon.

Mixing Instructions

1. Stir each component separately
2. Blend 2 parts A base to 1 part B of Reactor by volume
3. Mix thoroughly for two minutes
4. When preparing a grout, add 3 parts of sand to 1 part of mixed Epoxy and mix completely

Physical Properties/Technical Data

Mix Ratio:	2:1 By Volume
Pot Life:	15-20 minutes @ 73° F.
Final Cure (ASTM D 695):	3 Days @ 73° F.
Viscosity:	300 cps
Compressive Strength (ASTM D 695):	12,500 psi Minimum @ 77° F 28 days
Compressive modulus (ASTM D 695):	650,000 psi minimum @ 73° F. 28 days
Tensile Strength (ASTM D 638):	5,000 psi @ 14 days
Tensile Elongation (ASTM D 638):	3% Minimum @ 14 days
Shrinkage (ASTM C 883):	Passes Test
Color:	Amber
Shelf Life:	2 Years in unopened cans