| |
Description
Ultra-Anchor Epoxy is a 100% solids, two component, rapid setting,
nonabrasive, high modulus epoxy gel, designed for use in anchoring threaded
rod, bolts, reinforcing bars and smooth dowels to solid concrete. Ultra-Anchor
Epoxy is moisture insensitive and will bond to wet or dry
surfaces.
Ultra-Bond Epoxy is a thixotropic, amine based adhesive that
exhibits excellent adhesion to concrete and substrates. It can be used
vertically, horizontally or with screen tubers for anchoring in hollow masonry
walls.
This Epoxy system meets the requirements of ASTM C881-90 types IV
& V, Class A, Grade 3.
Ultra-Anchor Epoxy is also available in 2
gallon and 10 gallon units.
Advantages
-
Excellent
lubricity for faster pumping and less strain on pump
-
Nonabrasive
texture permits application with automated equipment
-
Insensitive to
moisture before, during, and after cure
-
High modulus,
high strength, structural paste adhesive
-
Excellent
adhesion to masonry, concrete, wood, steel, and most structural adhesives
-
Paste consistency
for vertical and overhead applications
-
Easy mix 1:1 mix
ratio by volume
Limitations
Ultra-Anchor Epoxy
should not be applied at temperatures below 33 degrees F. Do not apply over
latex concrete, mastics, or oily concrete
Pot Life: 5-10 minutes@77
degrees F.
Mix ratio: 1:1 volume
Coverage: 1 gallon yields 231 cubic
inches of Epoxy.
Physical
Properties/Technical Data
|
Mix Ratio: |
1:1 By Volume |
|
Pot Life: |
5-10 minutes @ 77° F. |
|
Color: |
Gray |
|
Cure Time: |
1-2 Hours @ 77° F. |
|
Compressive Strength (ASTM D 695): |
>10,000 psi Minimum |
|
Comprehensive Modulus (ASTM D 695): |
>22,500 psi Minimum |
|
Tensile Strength (ASTM D 638): |
>8,000 psi |
|
Pull Out Strength: |
1 >12,000 psi |
|
Bond Strength: |
2 day-2400 psi, 14 days-2800 psi |
|
Hardness Shore D (ASTM C 881): |
80 |
|
Viscosity: |
Non-Sag Paste |
|
Shelf Life: |
2 Years In Unopened Containers |
|
Water Absorption: |
0.13% |
Chemical
Resistance
Resistant to mild mineral acids, alkali's,
detergents, solvents, syydrol, hydraulic fluids, lubricating
oils, deicing salts, etc.
Packaging
Standard packaging: 1 gallon Part A : 1 gallon Part B in a carton. Available: 1/2 gallon units, 4 gallon
units, 10 gallon units.
© Copyright
1999-2002 · All rights reserved US Epoxy, Inc.
268 Route 112, Patchogue, NY 11772
(800) 332 · 3883 · fax (631) 654 · 0217
email:
info@usepoxy.com
|
|